Call Us at 713.356.3500

713.356.3500

product image

Dan-Loc Group can furnish a wide range of coatings designed to inhibit corrosion. Whether it is cadmium or zinc electroplating, Teflon/Xylan PTFE fluorocarbon, or other specialty coatings, all protect our products from conditions and environments that readily corrode unprotected bolts.

COATING/PLATING OPERATING TEMPERATURES

  • Cadmium Electroplating
    - High Service Temp: 608o F.
    - Low Service Temp: N/A; solid below 607o F.
  • Zinc or Zinc-Nickel Electroplating
    - High Service Temp: 788o F.
    - Low Service Temp: N/A; solid below 788o F.
  • Hot Dip Galvanizing
    - High Service Temp 800o F.
    - Low Service Temp: N/A; solid below 800o
  • DuPont Teflon®  857G Series PTFE
    - High Service Temp: 500o F.
    - Low Service Temp: N/A
  • Xylan® 1400 Series PTFE
    - High Service Temp: 450o F. continuous, 550o F. intermittent
    - Low Service Temp: -320o F.
  • Xylar 2® Cermet
    - High Service Temp: up to 1,000o F.
    - Low Service Temp: N/A
  • Zinc Phosphate
    - Ambient Temperature

 STANDARD COATING OPTIONS AVAILABLE

  • Xylan® PTFE
  • Xylar® Cermet
  • DuPont® 857G Series PTFE
  • SermaGard® 1105/1280 Cermet
  • Hot Dip Galvanizing
  • Mechanical Galvanizing (up to 1-1/2” dia., 5 lbs. wt., and/or 16” length per unit.)
  • Zinc Phosphate

STANDARD PLATING OPTIONS AVAILABLE

  • Cadmium
  • Zinc
  • Zinc-Nickel

Note: Xylan and Xylar are U.S. Patent & Trademark registered trade names of Whitford Worldwide Corp.

SermaGard is a trade name registered by Praxair, Inc. 

Tuff Cor

Tuff Cor - Corrosive Environment Bolt Coatings

Zcor

Zcor Bolts - Zinc Plated Fasteners & Bolts